Welcome to the official website of KINGUP SPC flooring Suppliers!
15 years PVC flooring Manufacturers
Reliable SPC Flooring Suppliers
Professional SPC Floor Supply Team
Floor Suppliers Telephone :

409-333-0007

Position:Home > News > Problem > >Maintenance of PVC floor

Maintenance of PVC floor

Author:EnManSen     Time:2019-11-15 18:21

  Floor maintenance is something that many people need to consider before installing the floor. The floor is different from the ceramic tile, so there are many differences in maintenance and use. Before, the maintenance of wooden floor needs a lot of time and money. With the continuous development of science and technology, the floor page has evolved from the previous solid wood floor into various types of floor, WPC floor, PVC floor, SPC floor and other new types Material flooring.
 

Maintenance of PVC floor_www.spcfloorsupplier.com

  Today, the author introduces in detail how to maintain PVC floor, what needs to be done at different time stages in daily use, hoping to help those who pay attention to PVC floor maintenance or need to learn.

  1. All kinds of dirt on the ground shall be removed in time.

  2. It is absolutely forbidden to immerse the floor in open water. Although some floors use waterproof glue to cut off the water source (such as floor drain, water room, etc.), long-term immersion in water will seriously affect the service life of the floor. In the cleaning process, the sewage shall be sucked dry by the water absorption machine in time.

  3. For places with more people flow and wear, shorten the maintenance period and increase the wax application times of high strength surface wax.

  4. It is absolutely forbidden to use hard and rough cleaning tools (such as steel ball, cleaning cloth, etc.) to prevent sharp objects from colliding with the elastic floor.

  5. It is strongly recommended to place foot pads at the entrance of public places with high traffic to prevent dirt, sand and other dirt from entering and scratching the ground materials.

  Maintenance at different stages

  (I) cleaning and maintenance after floor laying / before use

  1. First remove the dust and sundries on the floor surface.

  2. Add 3M red friction plate or similar products to the floor cleaning machine at low speed (dilute with 1:20 strong general cleaner and add into the floor cleaning machine), remove the protective wax, grease, dust and other dirt on the floor surface, and use the water absorption machine to dry the sewage.

  3. Wash and dry with clear water.

  4. As required, apply 1-2 layers of high strength wax.

  Detergent: strong general detergent, high strength wax

  Tool: ground grinding machine, red grinding plate, water absorption machine, wax dragging and pressing machine

  (II) daily cleaning and maintenance

  1. Push dust or vacuum cleaner. (drag the drag agent on the ground and dry it before pushing the dust. )

  Wet hauling. (use floor cleaner and polish agent to dilute with 1:20 water, and use semi wet mop to mop the floor. )If necessary, it can also be cleaned at a low speed with a mop machine and wash & shine.

  Cleaner: floor cleaner

  Tool: dust push mop

  (III) regular cleaning and maintenance

  1. Push dust or vacuum cleaner.

  2. The floor cleaner and polish agent shall be diluted with 1:20 water, and the floor shall be mopped or ground cleaned with high-speed polishing machine and red grinding plate.

  3. Top 1-2 layers of high strength wax.

  4. If necessary, it can be polished with high-speed polishing machine and white polishing pad.

  Cleaner: floor cleaner polish high strength wax

  Tools: dust grinding machine, red and white grinding machine, water absorption machine, wax dragging and pressing machine

  (IV) complete renovation

  1. Push dust or vacuum cleaner.

  2. After diluted with 1:10 strong dewaxing water, evenly apply it on the ground, wait for 5-10 minutes, and then clean and dewaxing at a low speed with a ground cleaning machine and a red grinding plate. Use the water absorption machine to suck up the sewage in time.

  3. Wash and dry with clear water until there is no residual detergent left on the ground.

  4. If necessary, apply 1-2 layers of high strength wax.

  Cleaner: floor cleaner polish high strength wax

  Tools: dust grinding machine, red and white grinding machine, water absorption machine, wax dragging and pressing machine

  (V) treatment of special dirt

  1. Greasy dirt: for local greasy dirt, pour the original liquid of water-based degreaser directly onto the towel and wipe it; for large-scale greasy dirt, dilute the unique water-based degreaser by 1:10, and then clean it at low speed with the ground cleaning machine and red friction plate.

  2. Black offset printing: spray cleaning and maintenance wax with high speed polishing machine and white polishing pad. For the long-term black offset, you can directly pour the strong black offset remover on the towel to wipe.

  3. Gum or gum: use a professional strong glue remover to wipe it off directly on the towel.

  Cleaning agent: water based degreaser spray cleaning wax strong black offset remover strong degreaser.

  In this paper, the PVC floor in different environments is introduced in detail, which basically meets the daily franchise situation. In the process of maintenance, we should pay attention not to use hard things, so as to avoid breaking the protective layer structure of PVC floor and causing losses.



Copyright © 2004-2020 KINGUP SPC lock floor Ltd. All Rights Reserved  
Address:Shijiazhuang Shi, Hebei Province, China  National service hotline:409-333-0007  Mail:admin@spcfloorsupplier.com

 Brand Support: Spc Flooring ENMANSEN