15 years floor ManufacturersFloor Suppliers Tel:+8615373925650

Position:Home > News > Company News >

Detailed different methods of SPC stone plastic floor mainte

2019-10-22 16:46 

  (I) cleaning and maintenance after floor laying / use

  1. First remove the dust and debris from the floor.

  2. Use a scrubbing machine and 3M red grinding machine or similar products to clean at a low speed (dilute with 1:20 strong common detergent and add it to the scrubbing liquid), remove the protective wax, grease, dust and other dirt on the floor, and use a water absorption machine to dry the sewage.

  3. Wash and dry with water.

  4. Apply 1-2 layers of high strength surface wax as required.

  Cleanser: powerful common cleanser high strength facial wax

  Tool: grinder, red grinder, water absorption machine, wax water tractor

  (II) routine cleaning and maintenance 1. Push dust or vacuum cleaner to vacuum. (drag the dust remover to the ground, dry it, and then push it into the dust.)

  2. wet towing. (use floor cleaner polish to dilute to water in a ratio of 1:20, and wipe the floor with a semi wet mop.)

  If necessary, you can also use a scrubbing machine with low speed washing and gloss cleaning.

  Cleaner: ground drag dust remover floor cleaner polish

  Tool: dust mop
 

Detailed different methods of SPC stone plastic floor mainte_www.spcfloorsupplier.com

  (III) regular cleaning and maintenance

  1. Push dust or vacuum cleaner to vacuum.

  2. Floor cleaning polish can be diluted with 1:20 water, dragged or scrubbed with a high-speed polishing machine with a red grinding plate.

  3. Upper 1-2 layers of high strength surface wax.

  4. According to the needs, it can be polished with high-speed polishing machine and white polishing pad.

  Cleaner: floor cleaner polish high strength surface wax

  Tool: dust crusher red, white wheel water absorption machine wax water tractor

  (IV) complete refurbishment

  1. Push dust or vacuum cleaner to vacuum.

  2. Use strong dewaxing water at the ratio of 1:10 to dilute and evenly apply it on the ground, wait for 5-10 minutes, use the scrubbing machine and red grinding wheel to clean at low speed and dewaxing.

  Use the water absorption machine to discharge the sewage in time.

  3. Wash with water and drain until there is no residual detergent on the ground.

  4. Apply 1-2 layers of high strength surface wax as required.

  Cleaner: floor cleaner polish high strength surface wax

  Tool: dust crusher red, white wheel water absorption machine wax water tractor

  (V) treatment of special dirt

  1. Engine oil: in case of local engine oil pollution, pour the original water-based degreaser solution directly onto the towel for wiping; in case of large-scale oiling, only dilute the degreaser at the ratio of 1:10, and clean it at a low speed with a rag machine and a red grinding plate.

  2. black Offsctdruckereien: spray cleaning and maintenance wax with high speed polishing machine, plus white polishing pad polishing treatment.

  For a long time of black offset, the strong black offset remover can be directly poured on the towel wipe.

  3. Glue or gum: it can be removed by directly pouring the professional strong degumming agent on the towel. Detergent: water based deoiling agent spray wax, strong black offset printing remover, strong degumming agent.