What is the production process of WPC floor?

  WPC floor is a new type of environmental protection floor which is popular in recent years. Its full name is: wood plastic composite. WPC floor comes from Europe and America. In recent years, it has been greatly developed in Asia Pacific region and welcomed by many families. For this new type of floor, what is its basic technology? I believe many people are concerned about it. Today, Huaxia floor supplier is Let's introduce in detail.

  What is the WPC floor?

  WPC wood plastic composite material was born in Cologne, Germany in 2005, and WPC wood plastic floor began to be popular in Europe and America in 2014. WPC wood plastic floor is made of SPP stone powder and resin nano materials by hot pressing. From the beginning to the end, it is made without glue to say goodbye to formaldehyde. Moreover, in today's scarce forest resources, WPC wood plastic floor protects forest resources to a certain extent, and penetrates into environmental protection from the source to create a green home.

  WPC flooring composition process

  WPC is a new type of environmental protection wood plastic composite product. In the production process, the raw material friction heat is used to achieve the hot-melt state, and then the extrusion production group is used to make the wood plastic floor.

  Wood plastic composite board is a kind of high-tech green environmental protection material, which is mainly composed of SPP stone powder, wood fiber as the basic material and thermoplastic resin material. After mixing evenly, it is heated and extruded by the mold equipment. It has the properties and characteristics of wood and resin. The real floor black Technology can replace wood and ceramic tile as a new environmental protection high-tech material Posites is abbreviated to WPC. Is a true zero formaldehyde environmental protection, waterproof, mute, elastic super floor!

  WPC stability

  The WPC floor shall be taken out for 6 hours under the high temperature of 80 degrees plus or minus 2 degrees and placed at the normal temperature of 23 degrees plus or minus 2 degrees and 50% humidity for 24 hours to observe. The following conclusions are drawn:

  Shrinkage of length is 0.08%

  Shrinkage of width is 0.05%

  Warpage: 0.25mm


  Warpage: 0.5-1.2mm

Leave a Reply

Your email address will not be published. Required fields are marked *